Design of a composite sulfuric acid decomposition reactor,concentrator, and preheater for hydrogen generation processes

The Hybrid Sulfur Process, as well as similar sulfur cycles for the production of nuclear hydrogen, requires the decomposition of sulfuric acid into sulfur dioxide, oxygen, and water at temperatures above 800 °C and at pressures up to 9 MPa. The design of a reactor for this process presents numerous challenges in terms of maintaining small pressure differentials and utilizing currently available materials of construction. This paper focuses on design calculations for a composite reactor that preheats, concentrates, and decomposes sulfuric acid for use in the production of hydrogen. The decomposition reaction takes place within individual tubes of a multitube reactor.     

An experimental investigation into the pre-treatment of synthetic membranes using sodium hydroxide solutions

In this paper the effect of two pre-treatment methods are compared experimentally for the filtration of (i) a spent sulphite liquor (17.8 wt.% dry solids) using a 20 kg mol⁻¹ molar mass cut off (MMCO) fluoropolymer membrane and (ii) a molasses solution (45° Brix) using a polysulphone (Psf) membrane (1.5 μm pore size). Both feeds are industrially relevant, and subject to severe fouling issues when membranes are used in their subsequent processing. The pre-treatment methods evaluated were: (i) conditioning with water at 60 °C only [Protocol 1], and (ii) conditioning with water at 60 °C followed by cleaning with 0.5 wt.% NaOH [Protocol 2]. Results are presented that confirm the benefits of sodium hydroxide preconditioning upon performance, supporting the suggestion by some membrane manufacturers that this step be included as part of the pre-treatment protocol.     

Moving ion fronts in mixed ionic‐electronic conducting polymer films

The aim of this paper is to analyze moving front dynamics of ions and holes in a planar, mixed ionic‐electronic conducting polymer film. As cations invade the film, holes evacuate; thus, an ionic current is converted to an electronic signal. Recent experiments show that the location of the advancing ion front increases as the square‐root of time, a scaling typically associated with diffusive transport, which is surprising given the large driving voltages utilized. Ionic and electronic transport is modeled via the drift‐diffusion equations. A similarity transformation reduces the governing partial differential equations to ordinary differential equations that are solved numerically. The similarity transformation elucidates the origin of the square‐root‐of‐time front scaling. The similarity solution is then compared to the numerical solution of the full drift‐diffusion equations, finding excellent agreement. When compared with experimental data, our model captures the front location; however, qualitative differences between the ion profiles are observed. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1447–1454, 2015     

Portable Infrared Spectrometer to Characterize and Differentiate Between Organic and Conventional Bovine Butter

The performance of a portable infrared system combined with pattern recognition to discriminate between organically and conventionally produced bovine butter samples as well as to predict the levels of conjugated linoleic acid (CLA) were evaluated. Sixty butter (27 organic and 33 conventional) samples were used in this study. Bovine butter–fat were applied onto an attenuated total reflectance infrared (ATR‐IR) accessory equipped with a five‐bounce ZnSe crystal set at 65 °C for spectral collection. In addition, ATR‐IR spectra of bovine butter were directly collected at room temperature to avoid phase separation. The fatty acid profile and the levels of CLA were determined using reference FAME‐GC‐FID analysis. SIMCA models showed well separated clusters that discriminated between organic and conventional bovine butters due to C=C trans bending out of the plane vibration modes band at 967 cm^?1. Additionally, strong PLSR models were developed to predict CLA levels using butter–fat and bovine butter spectra with SEP of 0.05 % and RPD of 4.7, indicating that the models are suitable for quality control applications. Portable IR technology offers the ability for “in situ” analysis of butters that is much less time consuming than current analytical practices for authentication and quality control efforts by the industry.     

The potential to retrofit sustainable drainage systems to address combined sewer overflow discharges in the Thames Tideway catchment

Experience of retrofitting sustainable drainage systems (SuDS) in the United Kingdom is limited, and there are no well‐established procedures for evaluating the feasibility, value or cost‐effectiveness of doing this, particularly at the catchment scale. This paper demonstrates a two‐phase process for evaluating the potential to retrofit SuDS to address combined sewer discharges in three subcatchments within the Thames Tideway catchment of London. The first phase evaluates what might be achieved with various levels of disconnection (‘global’ disconnection scenarios) using hydraulic models, while the second phase considers how disconnection might practically be achieved. High levels of disconnection are technically possible but practicably difficult. In selected cases, and with aggressive implementation of SuDS, combined sewer overflow CSO discharges could potentially be eliminated or reduced to acceptable levels without the need for any modifications to underground assets. However, retrofit SuDS could not eliminate the requirement for some form of sewer modification in any subcatchments.     

Avoiding filter cake cracking: Influence of consolidation on desaturation characteristics

In cake filtration processes with an air-blowing step, cracking is an undesirable phenomenon as it leads to deterioration of the filtration process by highly increasing gas throughput. This leads to higher residual moisture if the pressure difference cannot be maintained and an increase in overall cost. Crack formation can be avoided by compacting the filter cake before desaturation. While this action will make the separation process applicable by highly reducing gas consumption, there are also potential negative effects. Compaction increases filter cake resistance and might therefore slow down desaturation kinetics. Therefore, the authors investigated how the filter cake characteristics governing desaturation change from the nonconsolidated to the consolidated state of the filter cake and compared these findings to the actual dewatering kinetics. The results showed that for the case where cracking could be oppressed, dewatering kinetics of the consolidated cake are actually faster than for the nonconsolidated cake, despite higher resistance of the consolidated cake. Thus, compaction is an appropriate action when dealing with filter cake cracking.     

Development and Validation of an Artificial Mechanical Skin Model for the Study of Interactions between Skin and Microneedles

Microneedles are small needle‐like structures that are almost invisible to the naked eye. They have an immense potential to serve as a valuable tool in many medical applications, such as painless vaccination. Microneedles work by breaking through the stratum corneum, the outermost barrier layer of the skin, and providing a direct path for drug delivery into the skin. A lot of research has been presented over the past two decades on the applications of microneedles, yet the fundamental mechanism of how they interact, pressure, and penetrate the skin in its native state is worth examining further. As such, a major difficulty with understanding the mechanism of microneedle–skin interaction is the lack of an artificial mechanical human skin model to use as a standardized substrate. In this research news, the development of an artificial mechanical skin model based on a thorough mechanical study of fresh human and porcine skin samples is presented. The artificial mechanical skin model can be used to study the mechanical interactions between microneedles and skin, but not diffusion of molecules across skin. This model can assist in improving the performance of microneedles by enhancing the reproducibility of microneedle depth insertions for optimal drug delivery and biosensing.

     

Inhibition of Toll-Like Receptor 4 Signaling Mitigates Microvascular Loss but Not Fibrosis in a Model of Ischemic Acute Kidney Injury

The development of chronic kidney disease (CKD) following an episode of acute kidney injury (AKI) is an increasingly recognized clinical problem. Inhibition of toll-like receptor 4 (TLR4) protects renal function in animal models of AKI and has become a viable therapeutic strategy in AKI. However, the impact of TLR4 inhibition on the chronic sequelae of AKI is unknown. Consequently, we examined the chronic effects of TLR4 inhibition in a model of ischemic AKI. Mice with a TLR4-deletion on a C57BL/6 background and wild-type (WT) background control mice (C57BL/6) were subjected to bilateral renal artery clamping for 19 min and reperfusion for up to 6 weeks. Despite the acute protective effect of TLR4 inhibition on renal function (serum creatinine 1.6 ± 0.4 mg/dL TLR4-deletion vs. 2.8 ± 0.3 mg/dL·WT) and rates of tubular apoptosis following ischemic AKI, we found no difference in neutrophil or macrophage infiltration. Furthermore, we observed significant protection from microvascular rarefaction at six weeks following injury with TLR4-deletion, but this did not alter development of fibrosis. In conclusion, we validate the acute protective effect of TLR4 signal inhibition in AKI but demonstrate that this protective effect does not mitigate the sequential fibrogenic response in this model of ischemic AKI.